Instructions and Information
Power Punch Craft Punch Press Tool

   Instructions

      1.        Place the template on the pin of the base table.

      2.        Insert punch into the template.

      3.        Set paper on top of template, and slide into punch opening.

      4.        Apply light pressure to the arm of the Power Punch.

      5.        Done!  Fast, easy, fun and accurate!

    Information

• Clean with mild soap and water only.

• Use the diagonal lines to guide your paper in for corner punches.

  • Place your paper in the punch.  If you are using the punch without the corner guides, make sure it goes back far enough to allow the punch to connect with your paper.

  • Visually make sure the distance away from the closest diagonal line is the SAME on both sides.

  • If the distance is the same, you will get a perfect corner every time.

  • This technique takes a little practice.  You will love it once you play with it a little.

   

• Note that several patterns are designed to hold the Craft Punch upside down.  This is great for doing double punching or silhouette frame punching!

• Apply only enough pressure to the arm of the Power Punch to actuate the punch.  Too much pressure can damage some craft punches.  Use particular care when using the silhouette punches.  This style of punch has a double housing and is easily damaged.  Hanko Designs is not responsible for damage to your punches while using the Power Punch.

• Used correctly, the improved alignment and perpendicular force provided by the Power Punch actually improves punch life and helps reduce jams.

• The Hanko Designs reserves the right to change the design of the Power Punch and Punch Templates at any time.

Power Punch Tips

Mega Upgrade Kit Instructions

Handy Helper Template Instructions